This electrically activated clutch pump features a bronze body with a brass insert and offers all the benefits of flexible impeller pumps with substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. Equipped with mechanical clutch engagement screws in case of electrical failure. Good for pumping bilges, washdowns, circulating water in bait tanks, or as a utility dock-side pump. Stainless shaft, carbon-ceramic mechanical seal, twin row ball bearings. 2-A belt. Do not run dry. GPM figures are based on running at 1750 RPM.
A range of compact, raw water resistant, multipurpose bronze pumps. With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel transfer pumps and other applications. Also ideally suited on shore to empty septic tanks, to flush clean and to fill water tanks.
Suitable for bilge and washdown, you have pumping power on demand by the push of a button. With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Wearing parts are easily replaceable and service kits are available for all standard models. Has a bronze body and a connection for a vacuum switch. The shaft is stainless steel and is mounted with permanently lubricated double ball bearings. Mechanical seal. Full or reduced CAM. Pulley: 2xA or 1xB-groove. 50017 replacement for Jabsco 6400-0004. GPM shown at 1750 rpm. Pump only, clutch sold separately.