Primers

Sort by

Seahawk 1266GL FIBERGLASS NON-SANDING PRIMER

SizeGallon
Case2
$143.09 $99.37

Seahawk 1266QT FIBERGLASS NON-SANDING PRIMER

SizeQuart
Case6
$47.79 $34.38

Seahawk 1277GL BOTTOM PAINT PRIMER GALLON

SizeGallon
Case2
$107.39 $77.72

Seahawk 1277QT BOTTOM PAINT PRIMER QUART

SizeQuart
Case6
$32.69 $22.97

Seahawk 1284GLKIT TUFF STUFF 2GL KIT

ColorLight Gray
Size2 Gallon Kit
Case1
$263.99 $154.99

Seahawk 1284QTKIT TUFF STUFF 1/2 GL KIT

ColorLight Gray
Size1/2 Gallon Kit
Case3
$89.09 $52.99

Seahawk 1285QT KIT TUFF STUFF WHITE 1/2 GL KIT

ColorWhite
Size1/2 Gallon Kit
Case3
$89.09 $64.14

Seahawk 1285WGLKIT TUFF STUFF WHITE 2 GL KIT

ColorWhite
Size2 Gallon Kit
Case1
$263.99 $188.77

Seahawk 1286/GL TUFF STUFF LOW VOC GRAY GL KIT

ColorGray
SizeGallon
Case1
$137.59 $102.50

Seahawk 1287/GL TUFF STUFF LOW VOC WHITE GLKIT

ColorWhite
SizeGallon
Case1
$137.59 $102.50

Seahawk S75CQT ALUMI CHROME CATALYST QT

DescriptionCatalyst
SizeQuart
Case12
$35.69 $25.66

Seahawk S75QT ALUMI CHROME QT

DescriptionBase
SizeQuart
Case6
$62.59 $44.56

Seahawk SH984/GL SHAWKOCON GL

SizeGallon
Case2
$109.49 $84.01

Seahawk SH984/QT SHAWKOCON QT

SizeQuart
Case6
$32.89 $25.30

1266 FIBERGLASS NON-SANDING PRIMER (SEAHAWK)

Designed for use on a new fiberglass hull when sanding is prohibited by manufacturer. Softens existing gelcoat to create an adequate chemical bond.
From $34.38

1277 BOTTOM PAINT PRIMER (SEAHAWK)

A high build, chlorinated rubber based primer recommended for use over old copper based antifoulants prior to recoating. Also, a high build primer over metal and fiberglass to provide excellent corrosion resistance. A great insurance policy if old paint is unknown. Independent tests prove 1277 to be a great water barrier and an inexpensive way to keep water from penetrating your boat's hull.
Not for sale in CA
From $22.97

ALUMI-CHROME PRIMER S-75 & S-75C (SEAHAWK)

Two-component zinc chromate pigmented, polyvinyl butryl coating (wash primer) used as a pretreatment for metal. It serves as an excellent bond coat to many surfaces including aluminum, galvanized metal, lead, brass, magnesium, and other porous metals. This product is transparent yellow meeting specification MIL-C-851C. Apply by brush or spray.
From $25.66

Seahawk 1270KIT HAWK'S GRIP .75 GL KIT

Size.75 GL Kit (3 part)
Case1
$211.59 $152.53

Seahawk 1283GL ISLANDS PRIME GL

SizeGallon
Case2
$103.99 $75.13

Seahawk 2044/QT EPOXY REDUCER - QUART

SizeQuart
Case12
$29.79 $21.47

SHAWKOCON PRIMER (SEAHAWK)

sHAWKocon is a fast drying, general purpose below the waterline anti-corrosive primer. It's an easy to use multi-functional primer:
Conversion/Sealer coating over Sea Hawk Biocop TBT 1200 Series antifouling or any unknown well-adhered antifoulant paint to prevent cracking and promote adhesion of a new antifouling paint
Barrier/Sealer coating over incompatible or unknown antifoulants to prevent leaching and nn excellent barrier coat to reduce pitting of underwater metals from galvanic corrosion on running gear, lower units of outboards, keels, and I/O's.
From $25.30

TUFF STUFF (SEAHAWK)

A high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. It can be used as a universal primer for corrosion protection on most metals below the waterline such as props, keels, trim tabs, thru hulls and lower units or for priming any metal. Fills deep scratches and gouges in a few coats.
Not for sale in CA.
From $52.99

TUFF STUFF LOW VOC EPOXY PRIMER (SEAHAWK)

Tuff Stuff LOW VOC Epoxy Primer complies with rigid VOC limits set by the California Air Quality Management Board and offers a Low VOC alternative when applying water barrier or corrosion protection. Tuff Stuff Low VOC is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration. Tuff Stuff Low VOC is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal.
  • Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coat

  • Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead - above and below the waterline

  • Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units

  • Highest build epoxy - Fewer coats needed

  • Longer window between coats makes Tuff Stuff Low VOC easy to use

  • Reduced labor and less haul out time
From $102.50